dynexhobby002005.jpg dynexhobby001011.jpg
The Single Plane Balance

The single plane balance is an effective way of balancing rotors. For this method you will need to assemble your motor & rotor assembly in a cradle. Generally the cradle can be anything that will restrain the motor but will allow it to rock side to side freely. The rocking motion is what is measured by the balancer sensor. For the single plane balance you will need the following items;
>>Click to see cradle setup examples
 
Click on the DynexHobby icon on your desktop, then click on the platform icon e.g. Aircraft. Under the aircraft window click on "Single Plane".You will also need to setup the "Advanced Vibration Meter" located under the main window. Once everything is setup you are ready to proceed.
 
>>Click to setup Advanced Vibration Meter
 
STEP 1 Measure the Original Vibration (no weights)
 
(c) Dynex Hobby 2016. All rights reserved
STEP 2 Trial Unbalance
STEP 3 Determine Required Balance weight
pasted1001.jpg
Software
pasted1001.jpg
Manuals
pasted1001.jpg
Buy
pasted1001.jpg
FAQ
pasted1001.jpg
Tutorials